Acquapuro Side Spray
Side sprays are a handy addition to any kitchen sink, they simply pull up out of the work-top and deliver a shower spray at the press of a button.
Our side sprays have a progressive lever meaning the flow is controlled by how hard the lever is pressed which gives far better control unlike some other models which operate in an all-or-nothing method.
The hand spray is manufactured from chrome plated brass (not Acrylonitrile Butadiene Styrene - ABS plastic) and are of a very high-quality. The side sprays are compact, sleek in design and will look great alongside your kitchen tap.
The side spray is designed to connect directly to the hot or cold-water supply using a conventional ½” compression fitting which connects directly to a section of 15mm copper pipe, this means the tap does not have to be running for the spray to operate. If customers would prefer both - why not add our Acquapuro Thermostatic Valve which gives full temperature control.
Our side spray can be used alongside any kitchen tap, they have 18 nozzles and a 1.2m weighted stainless steel cord. Everything required is included with the spray and no specialist tools are required.
Side Spray Technical Data
Guarantee:
Two years for workmanship and working parts.
One year for the chrome finish.
Specification:
Minimum operating pressure 0.5 bar
Maximum operating pressure 2.5 bar
Base material ABS plastic
Hand shower material brass
Hand shower weight: 190g
Dimensions:
Overall height: 120mm
Base diameter: 55mm
Hose length: 1.2m
Recommended: hole size: 30 - 35mm
minimum hole size: 27mm
Thermostatic Valve
The Acquapuro Thermostatic Spray Valve has been specifically designed to enable hot or cold water be delivered from your Acquapuro side spray. The thermostatic valve enables users to have a temperature range from incoming cold mains water all the way up to 50+ degrees depending on where the chrome temperature dial is set.
This means customers can use cold water to wash through a lettuce and then switch to hot for washing down a dirty sink. For quick easy access to the temperature dial, we suggest the thermostatic valve is located just inside the kitchen cupboard under the worktop and the same side as the spray.
The thermostatic valve is supplied with everything required to connect it to an existing 15mm section of hot and cold-water copper pipe. This connection is achieved with an isolation tee which means that plumbing tools and basic skills are required to install the thermostatic valve. The pipework that connects the thermostatic valve to both chrome tees is a flexible ¼” plastic tubing resulting in the valve being positioned and connected very easily. It could even be located in a pull out drawer under the sink as the flexible connecting pipework is not fixed.
The Acquapuro side spray is available for a free next day delivery if ordered before 14.00.